Ok so my x5 was filled with water contaminated diesel! Ran fine till the next morning. Turns over no start
Diagnosed as dead injector 1 replaced
Rail pressure sensor faulty - rusted and replaced
Fuel filer replaced
Fuel tank emptied and wiped clean
Now starts but only after using easy start!
Fuel line changed
Starts now but only after 15 or so seconds of cranking runs drives fine. Turn off and it wont start unless eady start used.
Fuel tank sender unit pressure is 2300hpa
Now refuses to start. No more codes
So now at a loss as to whats wrong? Any pointers thoughts would be gratefully recieved.
Mileage is 100256 miles. New egr new maff new air filter 3 other injectors replaced. All oem parts.
Diagnosed as dead injector 1 replaced
Rail pressure sensor faulty - rusted and replaced
Fuel filer replaced
Fuel tank emptied and wiped clean
Now starts but only after using easy start!
Fuel line changed
Starts now but only after 15 or so seconds of cranking runs drives fine. Turn off and it wont start unless eady start used.
Fuel tank sender unit pressure is 2300hpa
Now refuses to start. No more codes
So now at a loss as to whats wrong? Any pointers thoughts would be gratefully recieved.
Mileage is 100256 miles. New egr new maff new air filter 3 other injectors replaced. All oem parts.